STUDI NUMERIKAL SAMBUNGAN BALOK KE KOLOM BAJA TIPE PELAT UJUNG PADA ARAH SUMBU KUAT KOLOM
Abstract
Beam-to-column connections are one of the most critical components in steel structures because they transfer internal forces between elements and influence structural response under loading, particularly during earthquakes. This study aims to evaluate the behavior of an extended end-plate connection on the strong axis through numerical analysis using the Finite Element Method (FEM) implemented in ABAQUS. The materials used include SS400 structural steel, ASTM A325 high-strength bolts, and E70 welding material. The analysis was carried out by applying monotonic loading concentrated at the top end of the column and cyclic loading based on displacement control in accordance with FEMA 350 and AISC 341-22 provisions. The parameters observed include stress distribution and the moment-rotation relationship of the connection. The analysis results show that the benchmark model was able to resist a maximum moment of 264.165 kN·m at 6% rotation, while the modified model reached 246.058 kN·m at the same rotation level. Both models satisfied the minimum moment capacity requirement of 0.8Mpb, or 245.52 kN·m, as specified in AISC 341-22. In terms of stress distribution, the modified model showed that plastic deformation was more concentrated in the beam, while the column stiffener remained in the elastic range, making the connection behavior more consistent with the strong column-weak beam design philosophy. In addition, the hysteresis curve of the modified model exhibited a more stable response and better energy dissipation capacity than the benchmark model. These findings indicate that adding a column stiffener can improve the seismic performance of extended end-plate connections through a more uniform stress distribution and a better plastic deformation mechanism.